User`s guide

5(7)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
98-05-29 C
114/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Programming
The AA-feature is fully programmable by the customer
in terms of settling the structure of AAs.
The procedure starts with creating the Automated
Attendant facility. It can be accessed only via RASC.
SELECTIONS LIST
From EXECUTIVE telephone sets, OPERATOR
console and RASC it is also possible to
fill/edit selections lists’ parameters.
Commands for creating/editing facilities
5424
Create an Automated Attendant facility
Via this command is possible to specify the directory
numbers of different AA-s (imply: voice menus) you are
going to need in your specific application. The first AA
(top level) must have a dialable directory number in
order that every one uses AA function just by calling it
directly. The directory number of all other AA (except
the top-level) can (or not) have a non-dialable directory
number (e.g. starting with D, *, # etc).
5624
Alter an Automated Attendant facility
This command allows you to change/edit the directory
numbers of AA-s. Also is possible to change/edit the
information in the "name"- field. The information here
can consist up to 35 characters. The first AA’s
corresponding information in this field will be displayed
on the telephone set of the subscriber that is using AA
feature (default information is "top-level").
5524
Delete an Automated Attendant facility
Via this command you can delete an AA-level.
8701
General-announcement reference
In this command you must specify the identification
number of the corresponding voice menus/
announcement.
xxxx directory number of the desired
AA.
yy identification number of the current
general voice announcement in the
corresponding level.
Press Enter to go to the next command of the current
selections list.
NOTE: Do not forget to record voice
announcements first (see command
4411).
8702
Error-announcement reference
In this command you must specify the identification
number of the "Error announcement".
xxxx directory number of the desired
AA.
yy identification number of the Automated
Attendant’s error announcement of the
corresponding level.
Press Enter to go to the next command of the current
selections list.
NOTE: Do not forget to record voice
announcements first (see command
4411).
10 Jul 14:40 +15˚
AA GENERAL ANNO. REF. C 8701 xxxx yy
backward forward c/i return
10 Jul 14:40 +15˚
AA ERROR ANNO. REF. C 8702 xxxx yy
backward forward c/i return