User`s guide

6(7)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
98-05-29 C
114/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
8703 - 8712
Digit 0 (- 9) related dir no
According to the current structure of Automated
Attendant-network, you can specify the addressing of
these commands. The addresses can be :
• directory numbers of physical extensions, or
• directory numbers of another AA or
• operator queue, ACD queue or PBX group.
• common abbreviated numbers or
• directory number of a common or individual mail-
box or
• DISA directory number
The following display refers to command 8703. The
same applies for commands up to 8712.
xxxx directory number of the desired
AA level.
yy desired directory number to be called by
pressing 0 ( 0- 9 ). It relates to the current
AA level. Enter #### if you want to have
automatic disconnection by pressing the
corresponding digit.
Press Enter to go to next command.
8713
Automated Attendant error reroute positon
In selections list it is possible to program an exit
position (for time-out and cases of wrong entries).
In this command you must specify the directory
number of the exit position.
xxxx directory number of the desired
AA.
yyyy directory number of the error reroute
position for the current AA. It can be:
• Directory number of physical extensions,
or
• Operator queue, ACD queue, PBX queue.
Enter #### if you want to have automatic
disconnection in case of errors.
Press Enter to go to next command.
8714
Waiting for full directory number
Each AA ( its selections list) can be programmed to
wait for a complete extension number or for single-digit
directory number.
xxxx directory number of the desired
AA.
yyy YES = if you want that procedure waits
for a complete directory number
NO = if you want that procedure waits for
single-digit directory number.
( NO is default value).
Press Enter to go to the next command.
NOTE: If selections list has been programmed to
wait for a full directory number
commands 8703-8712 will be invalid.
10 Jul 14:40 +15˚
DIG 0 RELATED DIR. NR. C 8701 xxxx yyyy
backward forward c/i return
10 Jul 14:40 +15˚
AA ERROR REROUTE POS C 8713 xxxx yyyy
backward forward c/i return
10 Jul 14:40 +15˚
WAITING FOR DIR. NR. C 8714 xxxx yyy
backward forward c/i return