User`s guide

7(8)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
98-05-29 D
140/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
FORMAT FOR OUTPUT
6403
Format table
This command is used to determine the format of the
data in the data record, so that it suits the connected
external unit. If data is sent to a connected external
printer, a printer format needs to be selected. As a
result a table header is obtained on the printout, which
makes the information clearer.
If the format is changed for a channel that is marked
faulty, it is possible that data are be lost.
FORMAT 00-29: Data format for output to external
unit.
00 No formatting, the channel is shut down
01 Call data to computer according to
MD110/standard format
02 Call data to printer, with table header
03 Call and hotel data to printer, with table header
04 Call and hotel data to computer according to
ASB150/ht format
05 Call and hotel data to computer according to
MD110/ht format
06 Call and hotel data to computer according to
HIS format
07 Call and hotel data to computer according to
CILHOTEL format
08 Call and hotel data to computer according to
CIL2HOTEL format
09 Call and hotel data to computer according to
CIL3HOTEL format
10-29 Reserve
FORMAT 30-59: Data format for input from external
unit.
30 No formatting, the channel is shut down
31-33 Reserve
34 Hotel data according to ASB150/ht format
35 Hotel data according to MD110/ht format
36 Hotel data according to HIS format
37 Hotel data according to CILHOTEL and
CIL2HOTEL format
38 Hotel data according to CILHOTEL and
CIL3HOTEL format
39-59 Reserve
FORMAT 60-99: Data format for both-way
communication.
60 No formatting, the channel is shut down
61-63 Reserve
64 Call and hotel data according to ASB150/ht
format (bi-direct)
65 Call and hotel data according to MD110/ht
format (bi-direct)
66 Call and hotel data according to HIS format
(bi-direct)
67 Call and hotel data according to CILHOTEL
format (bi-direct)
68 Call and hotel data according to CIL2HOTEL
format (bi-direct)
69 Call and hotel data according to CIL3HOTEL
format (bi-direct)
70-99 Reserve
Configuration of a bi-directional V.24 interface:
A bi-directional V.24 interface for CIL/HOTEL can only
be installed on CIL-port 0 (command 6401). Activate
the CIL-port 0 with YES (command 6402) and choose
a format for bothway communication (64 - 99).
6404
Lines/page
This command is used to determine the number of
lines per page for printout on a printer. Value = 0 - 99.