User`s guide

12(18)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 D
141/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
1614
Call meter (CML) receiver level
The command is valid for call meter receiver CM 12/16
(with CML circuit ROA 219 5135/1). This command
states the minimum level for the recognition of call-
metering pulses.
Time setting
1405
Wait time before metering is stopped
This command states for how long the call meter
receiver will remain active after the release of the
trunk.
1418
Minimum time for detection of call metering pulses
This command states the minimum duration of call-
metering pulses.
Call metering
6204
Log sent digits?
The dialled digits in case of call metering may differ
from those sent if Least Cost Routing is used. With this
command it can be defined which digits you want to
have logged. This definition applies for all formats
except the CIL2 format.
Set the command 6204 to "YES" if you want to log the
sent digits.
Set the command 6204 to "NO" if you want to log the
dialled digits.
The following commands are accessable via RASC
and the telephone:
6710
Currency identifier
zzz Enter abbreviation of the desired
currency identifier
(e.g. ATS, DM or SEK).
6711
Decimals in cost
States the number of decimals.
z Enter number of decimals
( possible values 0-4 )
6712
Currency identifier last?
States whether the local currency shall be displayed
and printed after or before the costs.
z Enter value
Y=Currency identifier after the costs
( e.g. 0.80 ATS )
N=Currency identifier before the costs
( e.g. ATS 0.80 )
14. Apr. 12.20
Currency identifier 6710 zzz
backward forward return
14. Apr. 12.20
DECIMALS IN COST 6711 z
backward forward return
14. Apr. 12.20
CURRENCY IDENTIFIER LAST? 6712 z
backward forward return