User`s guide

14(18)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 D
141/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
8401
Internal access code
This command is only used for Least Cost Routing. In
case of call metering set the carrier to "0".
8420
Carrier open for tenant
This command is only used for Least Cost Routing. In
case of call metering open the carrier 0 for tenant 00.
( for command 8420 put OPEN = YES ).
8424
Pulse cost metering
This command states the costs for a call-metering
pulse per tenant group.
Press Enter
x Enter the carrier number (0-7); in the CM
case enter always "0".
Press Enter
zz Enter the tenant number (0-15)
Press Enter
Enter the cost per pulse
Enter a maximum of 4 characters including
decimal point
To enter the decimal point, use the key *
8430-8435
Customer tariff (cost per pulse)
This commands define the cost for a call metering
pulse for trunks which have an assigned tariff number
within command 1502.
The required value for cost/pulse can have a
length of 10 digits including the decimal point.
Facility access COS
Facility access COS determines the access to fea-
tures. You may define COS for the groups 0–15.
3075
Read own meter?
COS to display own cost counter.
14. Apr. 12.20
PULSE COST METERING 8424 x
backward forward return
14. Apr. 12.20
TENANT NUMBER C 8424 0 zz
backward forward c/i return
14. Apr. 12.20
PULSE COST METERING C 8424 0 00>
backward forward c/i return
command tariff cost/pulse
8430 0 default (0)
8431 1 default (0)
8432 2 default (0)
8433 3 default (0)
8434 4 default (0)
8435 5 default (0)
14. Apr. 12.20
8424 0 00
return