User`s guide

2(2)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
97-10-31 B
145/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Limitations
Camp-on takes place only to a busy extension.
If the extension is free on Line 2 any new call will
always be presented on this line.
Camp-on to an analogue telephone results in the busy
extension receiving two tone bursts in her/his receiver.
Programming
0108
Camp-on allowed
Each extension can be blocked to prevent camp-on of
calls to the extension
xxxx Enter extension's directory number
z Enter required function:
Y = Camp-on permitted (default data).
N = Camp-on forbidden
0124
Call waiting tone to analogue extension
For an analogue extension to be able to receive call
waiting tone the following needs to be
programmed.
xxxx Enter analogue extension's directory
number
z Enter required function:
Y = Call waiting tone is supplied.
N = Call waiting tone is not supplied
(default data)
The following command is only accessable via
RASC:
2029
Programming of call waiting tone
There are two ways for indicating call waiting towards
analogue extension:
• Value "no" gives a short tone each time a new
call is put in the queue.
• Value "yes" gives a continous tone as long as
there are calls waiting.
Equipment
None.
10 Jul 14:40 +15˚
CAMP ON ALLOWED ? 0108 xxxx z
backward forward c/i return
10 Jul 14:40 +15˚
CALL WAITING TONE ? 0124 xxxx z
backward forward c/i return