User`s guide

2(2)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
98-01-26 A
151/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Programming
Following commands are only accessable via
RASC:
5629
Alter pick up code for common bell
This command gives the possibility to enter/change
the common bell pick up code.
6901
Common bell extension
This command helps you to define or change the
directory number of the common bell extension.
In order to reduce the time for dialling the common bell
code, it is possible to program it on a function key.
Trunk answering position
1101
Trunk answering position at day
The command is used to determine the individual
answering position for the trunk in a day-switched
exchange. An individual answering position is selected
by programming its directory number. If the directory
number is erased, the individual answering position
will be deleted.
Incoming calls are always presented on those system
telephones on which the trunk is represented by a
button. This applies irrespective of whether a directory
number has been programmed as individual
answering position.
1102
Trunk answering position at night
You can use this commands to define the common bell
extension as an answering position at day or at night.
1103
Reroute position at day
The command is used to determine the rerouting
position of the trunk in a day-switched exchange. To
this position unanswered external calls i.e. parked
calls, camped-on calls and transfer before answering
are routed.
The rerouting position is determined by stating its
directory number. The individual extension is removed
by blanking out the current directory number.
1104
Reroute position at night
You can define the common bell extension as an
reroute position at day or at night.
Following command is accessable via the
telephone and RASC:
4001 Alternative answer position
As it has been mentioned in the USE-paragraph of this
feature, the common bell extension can be defined as
answering position of the off-duty operator. In this case
the command 4001 can be used. You can program the
operator’s answering position via telephone set or it
can be done via RASC
Programming via telephone set:
zzzz Enter directory number of common bell
extension.
Equipment
No need for additional equipment.
18 Sep 14:40 +15˚
ALT.ANSWER POS 4001 zzzz
backward forward c/i return