User`s guide

7(16)
Datum/Date
Rev
Dokumentnr/Documentnr
Uppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked
Tillhör/Referens-File/Reference
99-07-15 D
152/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Snapshot device Request a snapshot device A device can be:
1.logical - e.g ACD group, or
2.physical - e.g. extension, trunk etc.
Features Request a report from an
extension for the features that are actually acti-
vated on that extension.
Device service Request the device type of the directory number
Request Description Notes
Capacity
It is possible to monitor up to 40 (80 with R10 system
software) CTI agents.
Limitations
The hotel guest instruments can not work as
monitored CTI agents.
ISDN-terminals can not be used as monitored CTI
agent.
ACD-supervisor functions are not supported.
In ECMA 179 the term “Caller ID” has been used for
the unique identification of a call. This caller ID is not
supported by the ASB 150 02, but instead, it has to be
generated by the software running on the connected
PC.
CTI may not be installed on one system , 1st party CTI
(TAPI) is already running, or vice versa. With system
software for R10 this limitation isn’t valid.
Programming
8901
CTI port
Via this command it is possible to specify which V.24
port is active for CTI.
bb Enter the boards number where the CTI
port is located 0-63.
ii Enter the individual number of the CTI
port on the board. The value must be
between 00-02.
The default value is blank and means that no CTI port
has been defined.
6006
Device type
The command defines to which type of locally
connected unit the I/O-port (V.24) is to be adapted.
When programming the unit the values of several
parameters, adapted for the connected unit, will be set
automatically.
aabb Line position
aa = board position
bb = Individual number on board, shall be
00-02 (depending on the CPU-D_ or
AUX_ board used).
10 Jul 14:40 +15˚
CTI PORT 8901 bbii
backward forward c/i return
10 Jul 14:40 +15˚
DEVICE TYPE LOCAL 6006 aabb cc
backward forward c/i return