User`s guide

8(16)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 D
152/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
cc Type of unit; the value must be 00-12,
default value is 3 (printer type).
In case of the CTI, the cc-parameter must be set to:
11= Operation and Maintenance centre (O & M centre)
with RASC, MS or CTI.
6007
Characterset
The command defines which set of characters shall
apply for the locally connected unit for the stated I/O-
port. The list of character sets is:
0 = PABX internal set
1 = USA ASCII (initial data)
2 = Swedish ASCII
3 = Character set 2 in printer ERICSSON 7111
4-9 = Undefined values
aabb Line position
aa = board position
bb = individual number on board, shall be
00-02 (depending on the CPU-D_ or
AUX_ board used).
c Set of characters; the value = 0-9
For the current case (CTI usage) the command must
be set to “1” meaning that US-ASCII character set has
been used.
6009
Baudrate
The command defines the bit speed for the V.24 port
used for CTI.
Using this command it is possible to select bit rates
between 50 - 9600 baud.
Codes are:
0= The stated board will not permit local V.24
connection.
aabb Line position
aa = board position
bb = individual number on board, shall be
00-02 (depending on the CPU-D_ or
AUX_ board used).
c Baud rate; the value = 00-16, default
value is 14 (9600 baud).
In this case (for CTI) the command must be set to 14
(9600 baud for R8, R9) or 16 (19200 baud for R10).
6010
Master / Slave
The command defines whether the PBX is master or
slave when connected to an external equipment on the
V.24 interface.
10 Jul 14:40 +15˚
CHARACTERSET LOCAL 6007 aabb c
backward forward c/i return
1= 50 9=1800
2= 75 10=2400
3=110 11=3600
4=135 12=4800
5=150 13=7200
6=300 14=9600
7=600 15=14400
8=1200 16=19200
10 Jul 14:40 +15˚
BAUDRATE LOCAL 6009 aabb c
backward forward c/i return
10 Jul 14:40 +15˚
MASTER/SLAVE 6010 Y
backward forward return