User`s guide

14(16)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 D
152/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
aabb Line position
aa = board position
bb = individual number on board, shall be
00-02 (depending on the CPU-D_ or
AUX_ board used).
c Set of characters; value = 0-9
For the current case (CTI usage) the command must
be set to “1”, meaning that the US-ASCII character set
has been used.
6009
Baudrate
The command defines the bit speed for the V.24 port
used for CTI.
Using this command it is possible to select bit rates
between 50 - 19200 baud.
Codes are:
0= The stated board will not permit local V.24
connection.
aabb Line position
aa = board position
bb = individual number on board, shall be
00-02 (depending on the CPU-D_ board
used).
c Baud rate; value = 00-16, default
value is 14 (9600 baud).
In this case (for CTI) the command must be set to 16
(19200 baud).
6010
Master / Slave
The command defines whether the PBX is master or
slave when connected to an external equipment on the
V.24 interface.
y 0: PBX is master
1: PBX is slave
For the current case (CTI usage) the command must
be set to “1”, meaning that the PABX is used as slave.
6011
Automatic selection of this port is allowed in local
connections
This command allows to specify whether or not
automatic selection will be allowed when locally
connecting external equipment.
If the answer is no, the port will only be used by
services which have commands of their own for
selecting ports.
If the answer is yes, the port may also be selected by
services which have no command for the specification
of the port.
1= 50 9=1800
2= 75 10=2400
3=110 11=3600
4=135 12=4800
5=150 13=7200
6=300 14=9600
7=600 15=14400
8=1200 16=19200
10 Jul 14:40 +15˚
CHARACTERSET LOCAL 6007 aabb c
backward forward c/i return
10 Jul 14:40 +15˚
BAUDRATE LOCAL 6009 aabb c
backward forward c/i return
10 Jul 14:40 +15˚
MASTER/SLAVE 6010 Y
backward forward return