User`s guide

3(4)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 B
153/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
It is also possible to change/edit the information in the
“name”- field. The information here can consist up to
35 characters.
8730
Greeting announcement reference
In this command you must specify the reference
number of the greeting announcement in the CTI
Groups facility.
Enter the directory number of the desired AA first
(there are max. 16 one-level AAs; only one of them
must be selected). Then enter the reference number of
the Automated Attendant’s greeting announcement.
Press "Enter" to go to the next command of the current
selections list.
8731
Instructions announcement reference
In this command you must specify the reference
number of the “Instruction announcement” for CTI
Groups facility.
Enter the directory number of the desired AA first.
Then enter the reference number of the Automated
Attendant’s instruction announcement.
Press Enter to go to the next command of the current
selections list.
8732
Error-announcement reference
In this command you must specify the reference
number of the “Error announcement” for CTI Groups
facility.
First enter the directory number of the desired AA.
Then enter the reference number of the Automated
Attendant’s error announcement.
Press Enter to go to next command of the current
selections list.
8733
Automated Attendant error reroute position
In this command you must specify the default exit
position in case of errors (time-out or wrong entries) for
CTI Groups facility.
First select the directory number of the desired AA.
Then enter the extension’s directory number of the exit
position.
If no exit position has been specified, the external
incoming calls will be rerouted to the reroute position
of the corresponding trunk.
8734
Use AA in combination with ACD group
This command will be used when the facility "CTI
Groups" shall be used as a call filter in front of an ACD
group.
The command states whether the facility "CTI Groups"
is used in combination with an ACD group or not. The
parameter is the directory number of an ACD group. If
there shall be no association with an ACD group, the
field is left blank.
If a valid directory number of an ACD group is entered,
the Automated Attendant will send MS-reports to a
connected MS-application upon rerouting an ACD call
by CTI.
4603
Record announcements allowed?
It is possible to determine whether or not a certain
VMU board may be used for voice announcements.
xxyy Enter board position (01 - 63) and 00
z Enter relevant function:
YES = Voice announcement can be
stored on board
NO = Voice announcement cannot be
stored on board (default value).
10 Jul 14:40 +15˚
REC ANNO ALLOWED ? 4603 xxyy zzz
backward forward c/i return