User`s guide

2(2)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 A
170/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
1804
DDI number translation
The command is used to determinate an individual
DDI number translation for a trunk.
The number value refers to the system defined
individual DDI number translation tables ’DDI1’ and/or
’DDI2’. The contents of these tables are used for the
translation of external DDI numbers to corresponding
internal directory numbers and vice versa.
Number translation at public calls
Following numbers can be subject for a translation:
- receiving of DDI (called) number from network
- sending of calling and connected numbers to network
In case of VPN calls, where both the public and private
calling / connected numbers may be translated and
sent to the network, both ’DDI1’ and ’DDI2’ tables can
be used for this purpose. In these cases it is assumed
that the first referred table is used for the public
number part.
Equipment
None.