User`s guide

2(4)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
97-10-31 C
163/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
5603
Change an extension's line position
Is used when two extensions are to change position
and retain their directory numbers as well as all
programmed categories and functions
> Press Enter
zzzz Enter extension number 1
qqqq Enter extension number 2
5604
Change of number series for extension
Alter the number series for an extension number. This
command is to be used only if you wish to alter the
entire existing number series on system start. Use the
command in an existing system. Enter the lowest
extension number in the new number series
For other directory number changes see the following
functions:
• ACD-group.
• Background music.
• Trunk line.
• Fictive number.
• PBX-hunting.
• Music-on-hold.
• Voice message.
• Answer group.
• Operator.
• Route.
• Paging.
• Common short numbers.
Display number series:
Using this group of commands you can read out which
directory numbers that are used in the system.
5801 - 5813
Reading of numbering series
This is a group of commands by which it is possible to
read which directory numbers are used in the system.
All commands in the group are presented and
administered in the same way.
5801 Show total survey
5802 Show extension
5803 Show trunk
5804 Show route
5805 Show PBX-group
5806 Show background music
5807 Show ACD-group
5808 Show pick-up group
5809 Show voice answer
5810 Show fictive number
5811 Show operator
5812 Show paging
10 Jul 14:40 +15˚
SWAP EXTENSION NO 5603 >
backward forward c/i return
10 Jul 14:40 +15˚
SWAP DIR. NO = zzzz WITH DIR. NO = qqqq
backward forward c/i return