User`s guide

Prepared
Document responsible/Approved Kontr/Checked
Subject responsible
Date Rev.
Document no.
File reference
99-07-15 U
155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
30(54)
Display for OPERATOR’s Console,
DBC214
On the OPERATOR’s Console the 4
th
and 5
th
line
(white area) is used for programming with the same
display picture as for the 2*20 character display.
13.1 Prerequisites for system
programming
System programming demands:
• an EXECUTIVE Telephone or an
OPERATOR’s Console
• An extension user who undertakes system
programming shall possess a facility category
(COS) that permits system programming
• The extension user shall have an authorisation
code that permits programming of the relevant
function
The programming function utilises the bottom two lines
of the display, the four menu keys and the Enter key.
The display images shown in the description below,
are only for the EXECUTIVE Telephone.
The differences in display layout for other telephone
types, see the description under section "Display
Messages".
13.1.1 To access programming mode
The EXECUTIVE Telephone shows in idle state:
Press *00#
NOTE: The menu key prog accesses individual
programming only.
The display shows:
Select "system" for system programming.
The display shows:
Enter relevant authorisation code and press Enter.
The display shows:
13.1.2 To enter command group
Enter relevant command group and press Enter.
The display shows (for example):
To the left is the text explaining the function of the
command group and to the right the command group
number (30).
The menu keys backward and forward can be used to
step through the different command groups.
By pressing return the previous display is shown.
1
2
3
4
5
10 Jul 14:40 +15˚
JOHNSON
directory redial prog
10 Jul 14:40 +15˚
SELECT PROGRAMMING
system phone
10 Jul 14:40 +15˚
ENTER PASSWORD _
10 Jul 14:40 +15˚
ENTER COMMAND _
copy return
10 Jul 14:40 +15˚
FACILITY ACCESS 30_
backward forward c/i return