User`s guide

3(3)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 B
168/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
0143
Line break time
This command is used to define the line break interval
for the door-speaker extension that is an analog
extension. When the call from the door-speaker has
been answered and the answering extension goes on-
hook without opening the door, deactivation of the
door-speaker occurs after a user-definable time.
The recommended value is 2,5 seconds.
USING OTHER DOORPHONES DIFFERENT FROM
ERICSSON DOOR INTERFACE UNIT
0121
DTMF to instrument?
This command helps to program door-speaker’s
extension position and must be settled in cases when
another type of doorphone has been used (different
from the above mentioned ERICSSON’s Door
Interface Unit). Specific for these doorphones is that
the digits sent by answering extension and used to
order the opening of the door will be sent to the
connected doorphone unit as DTMF tones.
xxxx Enter answering extension's directory
number
z Enter Y = YES
Enter N = NO (default value)
Equipment
A big varity of doorphones that fulfil a list of requests
(see Technical Data in the 1555-ASB15002. Uen
System Overwiev) can be connected to ASB150 02.
ERICSSON’s Offer
The ERICSSON’s Door Interface Unit must be
connected to an ELU-A and occupies two analogue
positions. In addition you need a doorphone (as
specified in Installation Instructions).
Other Offers
Any other suitable doorphone version can be used,
but verify that the command 0121 has been settled
properly.
10 Jul 14:40 +15˚
DTMF TO INSTRUMENT 0121 xxxx z
backward forward c/i return