User`s guide

Prepared
Document responsible/Approved Kontr/Checked
Subject responsible
Date Rev.
Document no.
File reference
99-07-15 U
155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
31(54)
13.1.3 To enter command number
Enter relevant number and press Enter.
The display shows (for example).
The text to the left explains the command function,
followed by the command number and a flashing
cursor that points to where a value shall be entered or
can be altered (Y).
Enter the relevant value and press Enter.
If several fields are to be completed the cursor will
move automatically to the next field, for example if a
directory number is to be typed.
Enter the relevant value in the new field and press
Enter.
After the last field has been completed press Enter
and the next command number is displayed as confir-
mation that the system has accepted the pro-
gramming.
13.1.4 Commands with extra data field
For certain commands, where the input field is so long
that not all of it can be seen on the display, this is
indicated at the extreme right by means of an
arrow (>).
The example below shows a command that enables
two numbers to change (swap) position
10 Jul 14:40 +15˚
DAY/NIGHT COMMON C 3001 5 Y
backward forward c/i return
10 Jul 14:40 +15˚
FUNCTION OF KEYS 0301 _
backward forward c/i return
10 Jul 14:40 +15˚
SWAP EXTENSION NO 5603 >
backward forward c/i return
When the arrow is displayed at the extreme right press
Enter, whereupon a new input field is shown.
Complete the left entry and press Enter.
Then complete the right entry and press Enter.
The next command is displayed.
13.1.5 To step between commands and
individuals
The "c/i" menu key makes it possible to let the
backward / forward keys to have different meanings:
In these commands a letter, C or I, is shown just before
the command number.
C indicates that key backward and forward step the
command to the next or preceding command number.
In this manner different commands can be
programmed for the same individual (extension or
trunk).
I indicates that key backward and forward step the
individual (extension or trunk) for the same command.
In this mode it is possible to program the same
command for several different extensions/trunks.
See also "Copying function" below.
10 Jul 14:40 +15˚
SWAP DIR.NO = zzzz WITH DIR.NO = qqqq
backward forward c/i return
10 Jul 14:40 +15˚
FUNCTION OF KEY C 0301 1234 23 4
backward forward c/i return
10 Jul 14:40 +15˚
FACILITY COS I 0101 200 0
backward forward c/i return