User`s guide

2(2)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
97-10-31 A
203/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
* Only valid, if reroute position is also a fax
extension
** We recommend not to program this voice
announcement. However, if it is programed,
the voice announcement will be played.
Capacity / Limitations
Each analogue extension can be configured as fax
extension.
Programming an individual as fax extension overrides
the command "1032 Trunk impedance adaption". This
command is normally used to state whether or not the
automatic trunk impedance adaption (ATIA) has to be
used.
Programming
This command can only be accessed via RASC:
0162
Terminal type
This command is used to define the terminal type
connected to the analogue extension interface.
Valid values: 0 Default, speech
1 General, 3.1kHz audio
2 Group 3 fax, 3.1kHz audio
3 Modem, 3.1kHz audio
Default value: 0 Default, speech
The terminal is autom. defined as fax extension, if you
select option: 2 Group 3 fax, 3.1kHz audio
Equipment
A FECU must be connected to the CPU-D4.
trunk facilities
1 reroute position
at day
not valid for
fax extensions *
2 reroute position
at night
not valid for
fax extensions *
3 common voice
announcement at day
not valid for
fax extensions **
4 common voice
announcement at night
not valid for
fax extensions **
5 busy voice
announcement at day
not valid for
fax extensions **
6 busy voice
announcement at night
not valid for
fax extensions **