User`s guide

Prepared
Document responsible/Approved Kontr/Checked
Subject responsible
Date Rev.
Document no.
File reference
99-07-15 U
155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
32(54)
13.1.6 Copying function
An entered value for an extension or trunk can be
copied to an optional number of other extensions or
trunks.
This is useful when, for example, several extensions
are to be assigned the same categories or key
functions.
When the display shows ENTER COMMAND, press
"copy" to access the copying function.
The display now shows:
Enter the command to be copied followed by the direc-
tory number of the extension or trunk that is to serve
as reference for copying.
The display now shows (for example):
If the command is of a type that also requires a record
number to be stated, for example when programming
keys on telephones, this shall also be stated when
copying:
Those individuals to which copying shall take place
can now be entered.
10 Jul 14:40 +15˚
COPY:_
pf_3 return
10 Jul 14:40 +15˚
COPY:0101 200 TO :_
pf_3 return
10 Jul 14:40 +15˚
COPY:0301 200 03 TO :_
pf_3 return
13.1.6.1 One or more individuals can be entered
Individuals are separated by a comma = menu key ",".
Several individuals in sequence are separated by
hyphen = menu key "-".
Example:
200 shall be copied to extensions 200, 205, 206, 207,
208 and 209.
13.1.6.2 To copy an entire command group
It is possible to copy all commands in a command
group. In this case only the two digits of the command
group are entered followed by *.
Example:
All categories in command group 01 are to be copied
To copy all records in a command group
For example all keys from extension 200 are to be
copied to a number of other extensions.
Enter * to then state that all records, that is keys, are to
be copied
10 Jul 14:40 +15˚
COPY:0101 200 TO : 200,205-209
pf_3 return
10 Jul 14:40 +15˚
COPY:01* 200 TO :_
pf_3 return
10 Jul 14:40 +15˚
COPY:0301 200 * TO :_
pf_3 return