User`s guide

5(5)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 C
220/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
The following commands are
accessible via RASC and System
telephones
3501
Hunt order
The hunt order for the group can be altered
xxxx Enter group call number
z Enter desired function:
Valid data: 0 = cyclic call distribution
1 = sequential call distribution
2 = parallel call distribution
Default data: 0 = cyclic call distribution
It is not possible to select parallel distribution from a
system telephone by command 3501.
3401
Group members
The directory numbers that are members of the group
need to be programmed.
Initially there are no members.
xxxx Enter group call number
yy Position number in group 0 - 19
zzzz Enter member's directory number.
If existing member is to be erased, press
- -key
In case of the selection of parallel distribution via
RASC, the programming of members via command
3401 is not possible from an instrument - only scrolling
through the list is allowed to do.
Equipment
FECU
To use the feature Group (PBX)-hunting with parallel
distribution, a FECU has to be connected to the CPU-
D4.
An unauthorized call to a group, which has
programmed parallel distribution, will be handled with
the default programming mode (cyclic distribution).
The warning "Feature protected by FECU" will be
generated after each incoming call to such a group.
For detailed description see Facility Description -
General, document 155 34-ASB 150 02 Uen.
10 Jul 14:40 +15˚
CYCLIC SELECTION ? 3501 xxxx z
backward forward c/i return
10 Jul 14:40 +15˚
PBX-MEMBER’S DIR.NO 3401 xxxx yy zzzz
backward forward c/i return