User`s guide

Prepared
Document responsible/Approved Kontr/Checked
Subject responsible
Date Rev.
Document no.
File reference
99-07-15 U
155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
33(54)
13.1.7 Return
It is always possible to return to the preceding level by
pressing key return.
13.1.8 To quit programming mode
It is always possible to quit the programming mode by
pressing the Clear key.
On the Operator’s Console DBC 214
the "Clear-right"-key has to be used.
On the Operator’s Console DBC 663 and DBC 754
the "Message"-key has to be used.
13.1.9 Error indication
If one presses a key for the wrong function or selects a
non approved parameter an error tone comprising
three short tone bursts will be heard.
As a rule the display will show a fault message. To
erase the fault message press menu key return (or
pf_3).
14 INDIVIDUAL
PROGRAMMING
14.1 General
Extensions equipped with system telephones can
access an individual programming mode.
What can be programmed varies depending on which
telephone is used.
* Offduty destination
14.2 Programmable keys
Extension users can only program those functions
permitted by the extension's facility category.
The following parameters can be altered:
• FUNCTION =
Determine function of key e.g. EXTERNAL LINE
• ASSOCIATED NUMBER =
Determine e.g. which trunk shall be stored on
key defined as EXTERNAL LINE
• RING TYPE =
Determines how incoming calls shall ring at
relevant key
Programmable
function
OPERATOR, DBC 214
EXECUTIVE, DBC 213
STANDARD, DBC 212
ECONOMYplus, DBC 211
BASIC, DBC 210
Function keys X X X X X
2nd layer (indiv.
abb. numbers)
XXXX
Diversion * X X X
Ring character X X X X X
Ring volume X X X X X