User`s guide

11(31)
Date Rev.
Document no.Prepared
Doc respons/Approved Checked File reference
99-07-15 E
241/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Subject responsible
Blocking room-to-room and DID calls in the whole
system
or
RTR block Room to room traffic is blocked.
Press to allow RTR traffic.
DID block Direct in-dialling is blocked.
Press to open for DID calls.
RTR open Room to room traffic is allowed.
Press to block RTR traffic.
DID open Direct in-dialling is open.
Press to block DID calls.
clear Press to go back to idle state.
return Press to go back to the previous menu.
To confirm the new value press 2nd + #.
Capacity / Limitations
Specific blockings being done on individual base will
not be affected by general blocking or opening.
In case of a checkout all individual settings will be set
to the default value (RTR and DID open) at the next
check in.
Is during the check in a generell blocking active (time
controlled or manually) then it is automatically also
valid for the new guest.
Programming
8004
Hotel answering position
It is possible to program, for example, the operator as
answering position for diverted guest-room calls.
zzzz Enter required directory number (1 - 4 digits).
Default value = 9
8002 - 8003
Define the time during which room-to-room traffic
shall be blocked for the system
zz Enter time when blocking shall commence
(00 - 23).
Default value = 00
zz Enter time when blocking shall cease (00 - 23).
Default value = 00
10 Jul 14:40 +15˚
SYSTEM LEVEL
RTR block DID block clear return
RTR open DID open clear return
10 Jul 14:40 +15˚
HOTEL ANSW. POS. 8004 zzzz
backward forward return
10 Jul 14:40 +15˚
RTR/DID BAR 8002 zz
backward forward return
10 Jul 14:40 +15˚
RTR/DID OPEN 8003 zz
backward forward return