User`s guide

14(31)
Date Rev.
Document no.Prepared
Doc respons/Approved Checked File reference
99-07-15 E
241/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Subject responsible
MESSAGE FACILITY
Definition
Message Facility means that internal and external
callers can leave messages in ASB 150 02.
A flashing lamp on system telephones indicates that a
message is waiting.
On extensions with analogue telephones message
waiting is indicated by a special dial tone that the user
hears when he lifts the handset.
Use
Messages can be left when one wishes to gain contact
with someone who does not answer or, for example, if
one wants to send information to one or more
extensions in the system.
Operation
Message facility with a VMU-D board
STANDARD -, ECONOMYplus - and BASIC telephone
A message is signalled by the lamp adjacent to the
message waiting key lighting and then flashing rapidly.
The message is answered by lifting the handset and
pressing the key.
If the message is a "call me" message a call will be
made to the extension / service quarter that left the
message.
The guest receives the ring control tone.
If the message is a voice message, the guest receives
a short tone followed by the recorded message.
The message is repeated twice.
Analogue telephone
A message is signalled by the lamp adjacent to the
message waiting key by lighting and then flashing
rapidly. The message is answered by lifting the
handset and dialing *59#.
The rest of the procedure is the same as for
STANDARD -, ECONOMYplus and BASIC telephones.
Message facility with a VMU-HD/MFU board
You can assign each extension to a MAILBOX. This
means that an extension has the opportunity to make a
diversion to a mailbox.
In that case calls to the extension are diverted to the
message system, where the caller can leave a voice
message to the extension.
For more information, see MAILBOX SYSTEM,
document 340/155 34-ASB 150 02 Uen.