User`s guide

28(31)
Date Rev.
Document no.Prepared
Doc respons/Approved Checked File reference
99-07-15 E
241/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Subject responsible
When the ordered wake-up time is shown, the user
may press - key to erase the time.
Press # to enter.
The display shows:
Capacity
The system can activate WAKE-UP for an arbitrary
number of guests at the same time.
Limitations
A maximum of five Wake-up attempts can be made.
Programming
Two commands in the facility category list are used to
determine who shall have the possibility to order
WAKE-UP.
See also CATEGORISATION,
document 149/155 34-ASB 150 02 Uen.
3062
Wake-up ordering?
This command is used to determine which facility cate-
gory shall be given the possibility to order WAKE-UP.
If the guests are to be given this possibility, they are to
be placed in the selected category.
xx Enter required ACOS (0 - 15)
z Enter required function.
Y = WAKE-UP may be ordered (default data).
N = WAKE-UP may not be ordered
3063
Wake-up for others?
This command is used to state which facility category
shall have the possibility to order WAKE-UP on behalf
of others.
It is advisable to place the Reception telephone and
operator in this group.
xx Enter required ACOS (0 - 15)
z Enter required function.
Y = WAKE-UP may be ordered.
N = WAKE-UP may not be ordered.
Default data = N
10 Jul 14:40 +15˚
GUEST ROOM NUMBER? _
clear
10 Jul 14:40 +15˚
WAKE-UP ORDERING 3062 xx z
backward forward c/i return
10 Jul 14:40 +15˚
WAKE-UP FOR OTHERS 3063 xx z
backward forward c/i return