User`s guide

Prepared
Document responsible/Approved Kontr/Checked
Subject responsible
Date Rev.
Document no.
File reference
99-07-15 U
155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
36(54)
The display shows a new image:
Use backward - and forward keys to scroll to relevant
ring type and, when this is displayed, press enter.
The display now shows the priority parameter:
Enter the new ORDER PRIORITY and then press
enter.
After all parameters have been shown the result of
programming will be displayed:
If several function keys are to be programmed press
the relevant key and the situation of this key will be
displayed:
• Press return to go back to selection image
• Press Clear key to quit programming mode
10 Jul 14:40 +15˚
RING TYPE - NO RINGING 0
backward forward enter return
SELECT PRIORITY 1
backward forward enter return
10 Jul 14:40 +15˚
10 Jul 14:40 +15˚
ACD-GROUP NUMBER 7 - ONE RING DEL. P=1
change return
14.2.5 To program ringing
Press ringing from the menu and the display shows:
To program ring type.
Press type, the display shows:
There are two ring types:
• Constant ringing level for all ring bursts
• Increasing level for each ring burst
Press next to select another ring type.
Press return to save the type of ring and return to the
selection menu.
To program ring volume:
Press volume:
Use keys lower and higher to adjust the ring volume
System responds by a ring burst of the selected
volume.
Program type of ring character:
Press key character
• Press next to adjust the ring character
Telephone signals calls with one ring burst
corresponding to selected character.
Procedure can be repeated an optional number
of times. There are 10 different character to
choose from.
• Press return to store the selected character and
go back to previous display picture
10 Jul 14:40 +15˚
RINGING - CHANGE
type volume character return
10 Jul 14:40 +15˚
PROGRAMMED TYPE OF RINGING: CONSTANT
next return