User`s guide

Prepared
Document responsible/Approved Kontr/Checked
Subject responsible
Date Rev.
Document no.
File reference
99-07-15 U
155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
37(54)
ECONOMYplus - and STANDARD Telephone
14.2.6 Access programming mode
Key following sequence:
• *00*. On/off lamp lights
You are now in Phone programming mode.
The display on the Standard Telephone shows:
14.2.7 To program individual short numbers
Key follow sequence:
• 2nd key
• Select programmable key
• Associated lamp lights
• On keyset, key digits to be stored ("Wait for 2nd
dial tone" is to be stated with 2nd / 2 keys)
• Press selected key again.
Associated lamp extinguishes.
14.2.8 To program divertee address
Key following sequence:
• Diversion key
Diversion lamp lights
• On keyset, key divertee position's directory
number (1 - 4 digits)
• Diversion key.
Lamp extinguishes.
14.2.9 Programmable keys
When the ASB 150 02 system is started for the first
time the function on all programmable
keys = NAME SELECTION.
This function can be altered by altering the key's
function code.
PROGRAMMING
A selected function code can (may) require further
parameters to be stated.
14.2.10 Programming sequence
The various parameters are programmed in one
sequence.
•Key
• Function code (10 - 39)
•Key
• Associated number (usually directory number)
•Key
• Ring type (0 - 5)
•Key
• Priority (0 - 7)
•Key
The lamp associated with the key lights on the first key
depression and remains lit until all parameters have
been entered.
14.2.11 Programming example
Program key A as a SUPERVISION-key of calls to
extension 200.
Calls are to be presented with one muted ring burst.
Key sequence:
• A key
• 3 (function code 3)
• A key
• 200 (directory number= 200)
• A key
• 3 (one mute ring burst)
• A key
14.2.12 To program ringing
To program ring type:
• Press 1* ring type (1 - 2)