User`s guide

Prepared
Document responsible/Approved Kontr/Checked
Subject responsible
Date Rev.
Document no.
File reference
99-07-15 U
155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
38(54)
To program ring volume:
• Press 2* level (0 - 9)
To program ring character:
• Press 3* character (0 - 9)
System answers to each programming with ring bursts
of the selected type, volume or character.
BASIC Telephones
14.2.13 Access programming mode
Key following sequence:
• *00*. Loudspeaker lamp lights
You are now in Phone programming mode.
14.2.14 Programmable keys
When the ASB 150 02 system is started for the first
time the function on all programmable
keys = NAME SELECTION.
This function can be altered by altering the key's
function code.
A selected function code can (may) require further
parameters to be stated.
14.2.15 Programming sequence
The various parameters are programmed in one
sequence.
•Key
• Function code (10 - 39)
•Key
• Associated number (usually directory number)
•Key
• Ring type (0 - 5)
•Key
• Priority (0 - 7)
•Key
The lamp associated with the key lights on the first key
depression and remains lit until all parameters have
been entered.
14.2.16 Programming example
Program key A as a SUPERVISION-key of calls to
extension 200.
Calls are to be presented with one muted ring burst.
Key sequence:
• A key
• 3 (function code 3)
• A key
• 200 (directory number= 200)
• A key
• 3 (one mute ring burst)
• A key
14.2.17 To program ringing
To program ring type:
• Press 1* ring type (1 - 2)
To program ring volume:
• Press 2* level (0 - 9)
To program ring character:
• Press 3* character (0 - 9)
System answers to each programming with ring bursts
of the selected type, volume or character.