User`s guide

2(2)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
97-10-31 B
264/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
NOTE: If, during an ongoing call, the user wishes
to dial an individual abbreviated number,
this will be sent via the seized traffic func-
tion.To be able to use abbreviated
numbers for inquiry calls manual
seizure of a new traffic function is
required.
Analogue Telephones
Initiation of inquiry
Inquiry is initiated as follows:
• Press R (Recall)-button
(Digit "1" is dialled on analogue rotary dial tele-
phones without R-button).
On initiation ongoing call is parked and new dial
tone is obtained
• Inquirer then dials relevant directory number
Reversion
Reversion to the parked party is achieved as follows:
• Press R-button
(digit "1" for rotary dial telephones).
If it is desired to disconnect the inquiree, the in-
quirer presses the R-button and 1, and to retain
the inquiree R-button and 2
If only the R-button is pressed, reconnection of the
parked party will take place automatically after three
seconds.
In the event of uncompleted inquiry from an analogue
rotary dial telephone, the user must replace the
handset and the extension will be rerung by the parked
party.
Capacity
The number of simultaneously ongoing inquiry calls is
limited only by the number of traffic functions on the
system telephones.
On an ANALOGUE Telephone only one inquiry call at
a time can be handled.
Limitations
Inquiry can only be initiated during an ongoing
answered call.
If a new traffic function key is pressed before answer,
the original call will be disconnected.
For initiation of inquiry calls the same prerequisites
apply as for normal incoming internal or external calls.
Programming
None.
Equipment
None.