User`s guide

6(31)
Datum/Date
Rev
Dokumentnr/Documentnr
Uppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked
Tillhör/Referens-File/Reference
99-07-15 C
265/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
0173
Diversion on not available external
Only available using the GAP protocol !
This command is used to activate diversion on not available for external incoming calls. Diversion on not available is
a result of a not available cordless. If no diversion address is specified the diversion is inactive.
xxxx Enter common directory number
Press ENTER
zzzzzzzz Enter diversion address
Note: After a call diversion "on not available" no repeated call diversion is possible any more.
Following commands have to be programmed to enable the "Who caller list" on the portable telephones
6803
Tenant Route
This command is used to define for each tenant group the default trunk route which shall be seized when a call is set
up from the caller list.
Default value = Empty
1936
International prefix to be included
Specifies the prefix code for international calls. The prefix is included as predigits to the received calling/connected
party number from the ISDN network.
On the system phones the complete public subscriber number is displayed.
Value: 1-4 digits
1937
National prefix to be included
Specifies the prefix code for national calls. The prefix is included as predigits to the received calling/connected party
number from the ISDN network.
On the system phones the complete public subscriber number is displayed.
Value: 1-4 digits
10 Jul 14:40 +15˚
DIV NOT AVAIL EXT. 0173 xxxx zzzzzzzz
backward forward c/i return
10 Jul 14:40 +15˚
zzzzzzzz 0173 xxxx
backward forward c/i return