User`s guide

8(31)
Datum/Date
Rev
Dokumentnr/Documentnr
Uppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked
Tillhör/Referens-File/Reference
99-07-15 C
265/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Standby Protection
To protect the system against misuse after a correct password is entered, a Standby mode is used. The
program switches to the Standby mode when during a 5 minute period the keyboard of the PC has been
left untouched. After entering a correct password the corresponding authority level is selected.
The standby protection is not applicable for the Off-line menus.
Initialization States
The integrated cordless system can be in two clearly different states:
- IC-CU_ is not yet initialized,
- IC-CU_ is initialized.
When the IC-CU_ is not yet initialized the Cordless System Software requests the input of the Distributor
password and then displays sequentially a number of screens that must be filled with data. Only after
this is completed the program enters the Distributor authority level.
When the IC-CU_ is initialized the program enters the authority level according to the password entered.
Default password: "AAAAAA"
User Interface
Introduction
The user interfaces with the Cordless System Manager by means of menus. The program presents the
name of the authority level on the first line when necessary.
Switching between Menus and Screens
When you want to return to a previous menu, press the <Esc> key. If there is no previous menu, the
<Esc> key stops the program (after acknowledgement).
When a large amount of data does not fit on a single screen, you can use the <PgDn> and <PgUp> keys
to display the next or preceding block of information.
Filling-out Fields
Dialogue screens contain several questions followed by fields. Fields are shown as inverse blocks and
are to be filled with values. Several fields contain a default value. You can move the cursor from one field
to an other field by pressing the <Enter> key or an ’Arrow’ key.
When you enter letters, they are shown on the screen as capital letters. When the input is processed, no
distinction is made between small and capital letters.
From any field, you may close the screen with Continue <F5>. From the last (final) field, you may also
close the screen with <Enter>.
Getting Started
1. Start the Cordless Syst.Software after the downmost green LED on the IC-CU_ board is switched off.