User`s guide

10(31)
Datum/Date
Rev
Dokumentnr/Documentnr
Uppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked
Tillhör/Referens-File/Reference
99-07-15 C
265/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Initialization Passwords
A password consists of a maximum of six alphanumeric characters.
Note: Take care not to forget the Distributor's password; only the manufacturer can change it.
Initialization Input Values
This screen allows you to specify the operational characteristics of the IC.
System Number (A protocol)
A number that is used to distinguish the DECT system from other DECT (neighbouring) systems.
The range is from 1 to 65535.
Do not take the default value ’1’, but choose for each system an unique number !
Access Rights Identity (GAP protocol)
A number that is used to distinguish the DECT GAP system from other DECT GAP (neighbouring)
systems. The B-ARI number is distributed by ETSI !
Number of Cabinets
All Integrated cordless boards have to be in the same cabinet. This value depends on in which cabinet
the boards are installed: Cabinet no. 0: Number of cabinets = 1
Cabinet no. 1: Number of cabinets = 2
Cabinet no. 2: Number of cabinets = 4
Default value: 1
Dialling Method
Set to value: PULSE
DCA Operation Class
We recommend to take the default value ’1’.
This command is not applicable for the Integrated Cordless System !
Wait for Dial Tone
GAP: We recommend to take the value ’NO WAIT’
A-protocol: We recommend to take the default value ’T’.
This command is not applicable for the Integrated Cordless System !
Date and Time DCT1800
Sets the date and time of the real time clock on the IC-CU_.