User`s guide

12(31)
Datum/Date
Rev
Dokumentnr/Documentnr
Uppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked
Tillhör/Referens-File/Reference
99-07-15 C
265/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
LTU Code
Menu path: Distributor - System - Parameters - Customize - LTU code
This command is also invoked by the initialization procedure.
R-button Method
This command is not applicable for the Integrated Cordless system !
Differential Ringing
The Integrated Cordless system supports three ringing types: internal, external and call-back. Each
ringing type results in a different ringing cadence on the Portable Telephone. Select No only when this
feature is not desired. In this case the ringing cadences of the Portable Telephone will be that of the
defined external ringing.
SPU Parameters
Menu path: Distributor - System - Parameters - Customize - SPU
This screen shows a number of parameters which should not be changed normally. These parameters
are country dependent and are loaded into the IC system by the country selection command.
Dial Tone Detection Time
This command is not applicable for the Integrated Cordless System !
Dial Tone Detection Level
This command is not applicable for the Integrated Cordless System !
Dial Tone Level Shifts
This command is not applicable for the Integrated Cordless System !
Alternative Dial Tone Level Shifts
The value must be 0 (default). This command is not applicable for the Integrated Cordless System !
SPU-S Dial Tone Detection Level
This command is not applicable for the Integrated Cordless System !
Echo-cancelling Time
To cancel echoes with an echo time of up to the indicated value (e.g. 7 ms). Echoes with echo times
higher than this value are not cancelled. The range is from 4 - 15 ms.
Soft Suppression Level
To reduce the speech from the other party (far end) with the indicated value (e.g. 12 dB) when near end
speech is detected. The range is from 0 to 50 dB.