User`s guide

14(31)
Datum/Date
Rev
Dokumentnr/Documentnr
Uppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked
Tillhör/Referens-File/Reference
99-07-15 C
265/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
specified during initialization when there are no indexes programmed in the cordless phone yet. This is
the case when the cordless phone has never been subscribed before, or when all indexes are cleared. If
a cordless phone is subscribed to a second system, the ringing cadences of the first system are not
overwritten.
Setting the cordless phone types in the initialization mode
1. Insert the RJ12 plug of the programmer cable in the programmer part.
2. Connect the programmer to the COM2 port of your personal computer.
Use the cable adapter (25 to 9 pins) if this is a 9pins connector.
3. Take care that the battery is charged. A cordless phone with a flat battery cannot be programmed.
4. Switch off the cordless phone and connect the other end of the programmer cable to it.
5. Switch on the cordless phone, by pressing the 1, 4 and ON keys simultaneously until the
message Init (on DT 368) is displayed.
6. Follow the instructions under header Subscribing the cordless phone to initialize the phone.
7. When the programming is completed, confirm and exit the initialization mode by pressing the ON
key. The cordless phone is now operational.
8. Disconnect the cordless phone from the programmer cable.
Subscribing the cordless phone
1. Select the cable subscription command. The right hand side of the cable subscription screen
gives you a list of indexes contained in the cordless phone. The left hand side of the screen
displays the values that are to be programmed into the cordless phone. The default extension
number is the first free extension number in the radio exchange.
2. If all indexes are in use enter the number of the index which has to be overwritten.
3. Confirm the default extension number or specify another one. The specified extension number
and its associated data are downloaded into the first free index of the cordless phone. When
ready, the message Portable subscribed. <Enter> is displayed.
On-air subscription (GAP only)
Menu path: Receptionist - Administrate - Onair subscription - Subscribe
Menu path: Distributor - Administrate - Onair subscription - Subscribe
By this command cordless phones are subscribed to the DCT1800 GAP system via the air. The
advantage of On-Air subscription with respect to cable subscription is that you do not have to connect a
programmer to the cordless phone. The cordless phone can be anywhere in the coverage area of the
system. On-Air subscription has to be used for GAP cordless phones that do not support cable
subscription.
The first screen only shows the first free extension number and a field to fill in the cordless phones IPEI
number. The extension number can be overwritten by another free extension number. You can subscribe
cordless phones with and without using their IPEI numbers. Only one cordless phone can be subscribed
without IPEI at a time.