User`s guide

15(31)
Datum/Date
Rev
Dokumentnr/Documentnr
Uppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked
Tillhör/Referens-File/Reference
99-07-15 C
265/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
When you press enter the PARK and an authentication code are given. The PARK can be entered in the
cordless phone to speed up subscription. The authentication code must be entered in the cordless
phone to enable subscription to the system. See the users guide of the cordless phone on how to
subscribe to the system.
When the procedure begins the on-air subscription mode is automatically set to on. The cordless phone
must subscribe to the system within 15 minutes. Timed out cordless phones cannot be subscribed
anymore unless the time out is reset by means of the On-Air subscription mode on command.
Note:
When the cordless phone does not contain any index, the cordless phone also does not have any
ringing cadence. If the cordless phone is subscribed via the air it is not provided with the systems
ringing cadences. As soon the cordless phone is subscribed, it uses default ringing cadences stored in
the cordless phone. For cordless phones which support cable subscription, these ringing cadences can
be overruled by using the ringing command after connecting the cordless phone to the programmer.
On-Air subscription mode on/off (GAP only)
Menu path: Receptionist - Administrate - Onair subscription - Mode on/off
Menu path: Distributor - Administrate - Onair subscription - Mode on/off
By this command On-Air subscription can be switched on and off. When subscription is switched off all
pending subscriptions are timed out; on the list extension number screen all these extensions will
change from SUB to TIM. When subscription is switched on, all subscriptions with the TIM status will get
the SUB status and a new timeout period of 15 minutes starts.
Cancel subscription (GAP only)
Menu path: Receptionist - Administrate - Cancel subscription
Menu path: Distributor - Administrate - Cancel subscription
By this command a subscription can be cancelled. If the cordless phone is switched on and in system
range, the subscription is also deleted from the cordless phone. Otherwise the cordless phone cannot
longer access the system because its subscription data is deleted from the systems data base.
Note:
Subscription can also be cancelled during an ongoing call. As a result the call will be cancelled.
Clear all indexes in cordless phone
Menu path: Receptionist - Administrate - Clear - Clear all
Menu path: Distributor - Administrate - Clear - Clear all
This command clears all indexes in a cordless phone. To carry out this command, the cordless phone
must be connected to the programmer cable and put in the initialization mode, see paragraph 7.2.1.
Clear on index
Menu path: Receptionist - Administrate - Clear - Clear on index
Menu path: Distributor - Administrate - Clear - Clear on index
This command clears a specific index in a cordless phone. Also subscription of other systems can be
cleared. To carry out this command, the cordless phone must be connected to the programmer cable
and put in the initialization mode. Select the index to be cleared and confirm (default index = 1).