User`s guide

Prepared
Document responsible/Approved Kontr/Checked
Subject responsible
Date Rev.
Document no.
File reference
99-07-15 U
155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
4(54)
2.6 Programming
Here are the programming commands stated that must
be executed to access the facility.
The programming commands are to be executed in the
sequence stated.
Each command is presented with a header and
command number in accordance with the following
pattern:
0301
Define key
After the command number has been entered the
display shows an image with the following pattern:
The second row shows, from the left:
• Explanatory text for the command
• 0301 Command number
• xxxx Fields to be completed in accordance
y, zz with command description
The programming procedures are described in section
SYSTEM PROGRAMMING in this document.
Certain functions, for example the function of the
telephone's keys, can be programmed by the user.
This is called and described in section INDIVIDUAL
PROGRAMMING in this document.
NOTE: Programming from other types of system
telephones may show a little different
layouts depending upon the display type.
For detailed information see section
SYSTEM PROGRAMMING in this document.
2.7 Equipment
Under this heading is stated whether any special
printed board assembly or other hardware needs to be
connected in order to access the facility.
10 Jul 14:40 +15˚
FUNCTION OF KEY 0301 xxxx y zz
backward forward c/i return
3 GENERAL
The FACILITY DESCRIPTION describes all facilities in
ASB 150 02 Release R10.
Each facility is described in accordance with a com-
mon pattern with the same headings used in all des-
criptions.
The documents also embrace the description of com-
mon functions and types of telephone.