User`s guide

20(31)
Datum/Date
Rev
Dokumentnr/Documentnr
Uppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked
Tillhör/Referens-File/Reference
99-07-15 C
265/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Version Info
Menu path: Distributor - Diagnostics/test - Info - Version info
This command displays the software revision level of all operational Base Stations.
Addr Address of Cell Link Circuit (CLC) to which the Base Station is connected:
- First column: Cabinet Number.
- Second column: Board Number of IC-LU or IC-CU2.
- Third column: Peripheral Number of IC-LU or IC-CU2.
Type Always `RFP': Radio Fixed Part (Base Station).
Firmware Revision level of the software, CAH/KRCNB 201/n, stored (down-loaded) in flash memory.
`None' means that down-loading has been failed.
Bootcode The revision level of software and the CPU, DTU, CLU and SPU for DECT GAP
are stored in non-volatile memory.
Error Tables
The Test and Maintenance software in the IC-CU_ maintains three logging tables that can be read by
the Cordless System Manager. These logging tables are referred to as:
- the Info Table,
- the Fault Table,
- the Service Table.
The Info and Fault Tables are meant for IC support specialists. The Service Table is meant for field
service technicians.
Info Table
Menu path: Distributor - Diagnostics/test - Info - Error tables - Info
This command displays the contents of the Info Table. The Info Table contains warning messages which
are meant for the IC support specialist.
Fault Table
Menu path: Distributor - Diagnostics/test - Info - Error tables - Fault
This command displays the contents of the Fault Table. The Fault Table contains error messages meant
for the IC support specialist.
Service Table
Menu path: Distributor - Diagnostics/test - Info - Error tables - Service
This command displays the contents of the Service Table. The Service Table contains error messages
meant for the field service technician.