User`s guide

3(3)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
97-10-31 B
267/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
0107
Protection against intrusion
If the extension position is to be protected against
intrusion this needs to be programmed.
xxxx Enter extension's directory number
z Enter relevant function:
Y = Intrusion permitted (default data).
N = Intrusion forbidden
These commands are only accessable via RASC:
1007
Intrusion (break in)
The command states whether or not intrusion shall be
permitted during an ongoing call. However, intrusion is
never permitted for data communications.
2406
Executive intrusion
If an extension encounters busy on a call to another
extension, the extension can initiate intrusion by
pressing a predetermined key.
This command is used to determine the digit to be
used for intrusion.
Only extensions with a service category permitting
initiation of intrusion are allowed to initiate (utilize) this
facility. See command 3004.
Intrusion can only be executed, if the categories of
both parties in the ongoing call permit intrusion. See
commands 0107 and 1007.
If the digit has been used previously for another facility,
it will be erased for this facility, i.e. the "old" facility will
be removed from the system. See the other
commands in this command group.
Equipment
None.
10 Jul 14:40 +15˚
BREAK-IN ALLOWED 0107 xxxx z
backward forward c/i return