User`s guide

9(44)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 G
268/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Outgoing Traffic
1013
Dial tone to extension?
Defines whether a dial tone shall be sent after dialling
the route-access number.
Valid data: Yes / No
1014
Result tones to connected exchange?
Defines whether or not the result tone shall be sent to
the public exchange.
Valid data: Yes / No
1015
Predigits for TCD and LCR.
The command assigns a number to routes. This
number is used as predigits for TCD and LCR.
1018
Subsystem to PBX ( only prepared )
This command states whether the ASB 150 02 is
connected to another PBX. If it is, the outgoing call will
not be checked by the TCD.
Valid data: Yes / No
1307
PTS-signal from PE?
States whether the public exchange supplies a PTS
signal.
Valid data: Yes / No
1308
PTS-signal from PE is dial tone?
States whether the PTS signal from the public
exchange comprises dial tone.
Valid data: Yes / No
1410
Time for recall on camp on.
States the time before a camped-on call recalls the
transferring party.
Valid data: 0 -255 sec
Incoming traffic
1101
Answering position at day.
Should not be programmed in conjunction with DDI.
1102
Answering position at night.
Should not be programmed in conjunction with DDI.
1103
Reroute position at day.
This is where unanswered external calls are routed
during the day.
1104
Reroute position at night.
This is where unanswered external calls are routed
during the night switching mode.