User`s guide

18(44)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 G
268/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
1956
MSN provided ?
This command states whether MSN ( = Multiple
Subscriber Number ) is provided by the terminal
user(s) on the interface.
Valid data: No MSN is not provided
Yes MSN is provided
Default data: NO
NOTE: This feature can only be used, if the
ISDN-terminals are programmed also
with the MSN !
1957
Number secrecy allowed ?
This command states whether the terminal user(s) are
allowed to restrict the presentation of the own calling /
connected party number in the network.
Valid data: No Restriction not allowed
Yes Restriction allowed
Default data: No
1958
Common access number
This command states which of the dedicated route
number(s) for this interface is the common access
number.
Valid data: 1-4 digit numbers,
corresponding to the
route number
Default data: none
NOTE The selected route must be created first !
1959
Assigned TEI values
This command states the non-automatic TEI
( = Terminal Endpoint Identifer ) values for the
S-Interface. Max 8 TEI values per interface can be
defined.
Default data: none
EQUIPMENT
The BTU-B_/MFU can be used either for the T- or the
S-interface.
Regarding the DIP switches following configurations
are possible on:
BTU-B_:
• 0 T-interface, 8 S-interfaces
• 2 T-interfaces, 6 S-interfaces
• 4 T-interfaces, 4 S-interfaces
• 6 T-interfaces, 2 S-interfaces
• 8 T-interfaces, 0 S-interface.
MFU:
• 0 T-interface, 4 S-interfaces
• 1 T-interfaces, 3 S-interfaces
• 2 T-interfaces, 2 S-interfaces
• 3 T-interfaces, 1 S-interfaces
• 4 T-interfaces, 0 S-interface.