User`s guide

27(44)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 G
268/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
PROGRAMMING
1914
Subscribed charging method
This command refers to the respective selected trunk
board and individual link ( BTU-D=1 link ,
BTU-B_=8(4) links, MFU=4 links) and states which
type of call metering has been subscribed by the public
network.
Valid data: AOC not subscribed
AOC - D subscribed
AOC - E subscribed
AOC permanently subscribed
AOC not subscribed
In the public network the call meter information for the
link is deactivated. In this setting, ASB 150 02 does not
request any call meters from the public network.
AOC - D subscribed
At call setup to the public network, ASB 150 02
requests for charging information during the call and at
the end of the call.
AOC - E subscribed
At call setup to the public network, ASB 150 02
requests for the charging information at the end of the
call.
AOC permanently subscribed
The public network automatically sends call meter
information to ASB 150 02 during the call and at the
end of the call. At call setup to the public network, ASB
150 02 does not request call meter information and
accepts any information received from the public
network.
Depending on the public network, the call meter
information is sent in the form of metering pulses
(charging units) or costs (currency units).
If charging units are received, ASB150 can convert
them into currency units and shows the costs on the
display. If currency units are received from the public
network these are transformed by the system into the
internal format. ( command 6710 )
6710
Currency identifier
This command states the currency identifier to be
shown on the display or printer ( e.g. ATS, DM or
SEK )
6711
Decimals in cost
States the number of decimals to be shown on the
display or printer.
6712
Currency identifier last
States whether the currency identifier shall be shown
in front of or after the costs ( e.g. 100.00 ATS or ATS
100.00 ).
If the public network sends charging units, the
following command has to be defined.
8424
Pulse cost metering
States the price per metering pulse for conversion into
costs.
All further commands see “CALL METERING“,
document 141 / 15534-ASB 150 02 Uen.
EQUIPMENT
BTU-D with ISDN prom set or BTU-B_ or MFU.