User`s guide

35(44)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 G
268/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
LIMITATIONS
The number of the connected B-party is only
transmitted upon the first answer. If the call is
transferred after the first answer, the new number is
not transmitted to the A-party.
For an incoming ISDN call the following numbers are
sent to the public network.
In the cases below only the directory number is
mentioned. It depends on the configuration, what
predigits of the directory number are used .
B-party is an extension or an ISDN terminal
The directory number of the answering extension or
the ISDN terminal is sent to the public network.
B-party is an operator
The directory number of the answering operator is sent
to the public network.
If the call is queued at the operator, the B-party
number will not be sent to the public network.
B-party is a PBX-hunting group
The directory number of the respective answering
group member is sent to the public network.
B-party is a voice service
(e.g. programmed absent info)
The B-party number will not be sent to the public
network.
B-party is an ACD group
The directory number of the answering agent is sent to
the public network.
If the call to the ACD group is queued in the ACD
queue, the B-party number will not be sent to the
public network.
PROGRAMMING
1918
Connected line presentation on
This command refers to the respective selected trunk
board and individual link. ( BTU-D =1 link,
BTU-B_ = 8 (4) links, MFU = 4 links ) The command
states whether ASB 150 02 shall send the number of
the answering B-party to the public network at
incoming ISDN calls, or whether the public network
shall assume identification and send the national
significant number assigned to the answering B-party's
PBX to the A-party. In this case, the directory number
of the answering B-party is not contained.
Valid data: Yes / No
Yes:
ASB 150 02 sends the number of
the answering B-party to the public
network. It depends on the configuration
of command 2220 how this number looks
like ( national siginificant number,
subscriber number or only directory
number ).
No:
ASB 150 02 does not send the number
of the answering B-party to the public
network.
0169
Directory number in subscribed PSTN series
This command defines whether the internal
programmed directory number of the extension is in
the subscribed PSTN number range. If the directory
number is not in the number range, a common number
defined by command 1801, is used in case of A- or B-
number sending.
EQUIPMENT
BTU-D with ISDN prom set or BTU-B_ or MFU.