User`s guide

41(44)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 G
268/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
3049
Program malicious call id
States which A-COS may program the "MCID“ function
key.
xx Enter facility category (0-15)
z Enter the relevant function
Y = allowed
N = not allowed
0301
Program Function key
A function key needs to be programmed to activate the
MCID function
xxxx Enter extension´s directory number
yy Enter relevant key (00-48)
zz Enter function code =41
1917
MCID subscribed
This command refers to the respective selected trunk
board and individual link ( BTU-D = 1 link,
BTU-B_ = 8 (4) links, MFU= 4 links ) and states
whether the supplementary service MCID has been
subscribed in the network.
Valid data: Yes/No
No
If a extension activates the MCID
function, thenit will be ignored by the
BTU-D/BTU-B_/MFU
There is no inquiry to the public network.
Ye s
If an extension activates the MCID
function, BTU-D/BTU-B_/MFU sends
an inquriy to the public network
ISDN terminals
1955
MCID allowed by the TE?
This command states whether MCID (= Malicious Call
IDentification) is allowed by the terminal user(s) on the
interface.
Valid data: Yes/No
No MCID is not allowed
Yes MCID is allowed
Default data: No
EQUIPMENT
BTU-D with ISDN prom set or BTU-B_ or MFU
10 Jul 14:40 +15˚
PROG MALICIOUS ID 3049 xx z
backward forward c/i return
10 Jul 14:40 +15˚
FUNCTION OF KEY 0301 xxxx yy zz
backward forward c/i return