User`s guide

1(4)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
97-10-31 B
322/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
SEA/TB/MP T.Preißner
SEA/TB/MP ASB 150 02
SEA/TB/XE
LOUDSPEAKER PAGING
Definition
Loudspeaker paging denotes a call from a system
telephone that is announced via the loudspeakers in
all or groups of system telephones with loudspeakers.
Loudspeaker paging can also be combined with the
immediate answer possibility.
Use
Loudspeaker paging is used to gain rapid contact with
one or more persons.
By means of division into groups it is possible to page
within one department only or to page all extensions.
By paging in one department only it is possible to
avoid disturbing people who are not involved.
A paged extension (pagee) can answer the call directly
by moving to the nearest telephone that has the group
key programmed.
Operation
Call
To initiate loudspeaker paging:
• Press key for group of extensions to be paged.
Lamp of group key glows steadily at the same
time as either Line 1 or Line 2 * is seized.
( * not available on BASIC Telephone)
When key is pressed all free extensions in group
hear short tone burst.
• Now press key once more and announce mes-
sage.
Keep key depressed until entire message has
been transmitted and then release it.
For extensions with group key, the lamp now
starts to flash rapidly
If call is not disconnected manually via Clear-key,
automatic disconnection will take place 30 seconds
after release of call key.
This monitoring period gives the pagee time to answer
the call directly.
Answer
An extension who hears paging can call the pager by
means of a normal internal call.
Answer via group key
An extension user who hears paging can, if he/she has
access to the button for the paging group, answer the
call directly as long as the group key lamp flashes.
• Press group key.
Speech status with pager will be established.
When speech connection has been established
call will be signalled as normal internal call via
Line 1, Line 2 * or Inquiry.
( * not available on BASIC Telephone)
Signalling via group key ceases and paging
channel is released.
If an extension who receives a call initiates an
outgoing call, paging in (via) the monitoring
322.fm
Database reference