User`s guide

16(32)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-08-17 E
340/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Programming
Categorisation
0101
Facility COS
Each extension is assigned to a facility category (class
of service) that has the desired mailbox functions:
xxxx Enter extension's directory number
zz Enter relevant facility category (0 - 15)
For programming of the facility category list, see
MESSAGE SYSTEM,
document 341/155 34-ASB 150 02 Uen.
1029
Tenant Group
The command defines to which tenant group the trunk
belongs to. The ASB 150 can divide the trunks among
a maximum of 16 tenants.
4314
Simultaneous retrievings
This command is used to restrict the number of callers
simultaneously retrieving messages from the mailbox
system.
This is special important when messages are retrieved
from extensions without display or from external
callers. In these cases voice prompts are used to
guide the caller through the retrieving session. Also
when a caller is sending messages voice prompts are
used to guide a caller through a storing session.
To play voice prompts a voice channel is required.
To avoid that the storing of messages is blocked
because several retrieving sessions are guided by
voice prompts, the number of simultaneous retrieval
sessions can be limited.
z Enter the number of simultaneous
retrieving processes.
values: 1 - 16
Default data: 2
0160
Password check retrieving messages internally ?
To avoid a unauthorized internal retrieving of
messages a password check (=authorisation code)
can be programmed. For external retrieving and
retrieving messages from other telephones than one’s
own, the password check will always be performed.
xxxx Enter extension's directory number
z Enter relevant function.
Y = Check password for internal
retrieving of messages.
N = Skip password check for internal
retrieving of messages. (Default data)
NOTE: Before programming this command, you
need to set command 0117 to YES!
0151
Tenant Group
This command defines which tenant group the
extension belongs to.
10 Jul 14:40 +15˚
FACILITY COS C 0101 xxxx zz
backward forward c/i return
10 Jul 14:40 +15˚
SIMULT.RETRIEVINGS 4314 z
backward forward return
10 Jul 14:40 +15˚
PASSW.CHECK INT? C 0160 xxxx z
backward forward c/i return