User`s guide

21(32)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-08-17 E
340/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
8503
Individual welcome number 2
This command states the reference number for part
two of the welcome message when a call is diverted to
the mailbox system.
This command has no function if command 8502 is
programmed to NO !
yy Enter tenant number (value = 0-15)
zz Enter welcome message number
(value = 0-31)
NOTE: The welcome message has to be
recorded first.
(Command No.: 4415)
8510
Individual welcome retrieving
When an extension (internal or external) calls directly
to the mailbox system, a retrieving session of
individual messages is started. The caller is then
greeted by a welcome announcement.
In this command the voice reference for the
announcement is stated.
It is possible to state one announcement for each
tenant group.
yy Enter tenant number (value = 0-15)
zz Enter welcome message number
(value = 0-15)
NOTE: The welcome announcement has
to be recorded first.
(Command No.: 4416)
8512
Exit position for individual message
An external caller who is diverted to the mailbox
system has the possibility to be connected to another
extension instead of leaving a message. This is the
directory number the external caller will be rerouted to.
For each tenant group an exit position can be
specified.
If no directory number is specified, the external caller
is routed to the rerouting position of the relevant trunk.
If it is an internal call, the call will be disconnected.
yy Enter tenant group number (value = 0-15)
xxxx Enter exit-directory number
10 Jul 14:40 +15˚
INDIVID WELCOME NO2 C 8503 yy zz
backward forward c/i return
10 Jul 14:40 +15˚
INDIVID WELCOME RET C 8510 yy zz
backward forward c/i return
10 Jul 14:40 +15˚
EXIT POS INDIVID MSG C 8512 yy xxxx
backward forward c/i return