User`s guide

2(4)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 E
343/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
EXECUTIVE Telephone
xxxx enter extension’s directory number
z defines whether or not the specified
extension will be connected to music-on
hold, while being in the parked status.
Valid data: Yes/No
Y (Yes) = Connected to music-on-hold
channel
N (no) = Connected to silence channel
Default data:Yes
The following commands are only accessable via
RASC:
5403
Create music-on-hold
In order to obtain a music channel, it has to be created.
5503
Delete music-on-hold
5610
Alter music-on-hold
3601
Music source directory number
The command is used to define the interface of the
external connected/integrated music source.
An external music source can be either connected via
the CPU-D_ board (D#00) or via the analogue trunk
line.
For programming the integrated music source ( 16
different announcements ) the valid announcement
number is required, which in this case ranges between
D420 and D42F.
Valid data: D#00 CPU-D_
xxxx Dir number of the
trunk line
D420 Voice Prompt 0
D421 Voice Prompt 1
D422 Voice Prompt 2
D423 Voice Prompt 3
D424 Voice Prompt 4
D425 Voice Prompt 5
D426 Voice Prompt 6
D427 Voice Prompt 7
D428 Voice Prompt 8
D429 Voice Prompt 9
D42A Voice Prompt 10
D42B Voice Prompt 11
D42C Voice Prompt 12
D42D Voice Prompt 13
D42E Voice Prompt 14
D42F Voice Prompt 15
Default data: ----
2039
Keep music on hold
This command defines whether music-on-hold is to be
supplied until the speech connection is established, or
music on hold is to be supplied only during the transfer
procedure and then the ringing tone will be sent to the
caller.
Valid data: Yes/No
Yes=until speech connection
No= only during transfer
Default data: No
10 Jul 14:40 +15˚
MUSIC IN HOLD STATE? 0161 xxxx z
backward forward c/i return