User`s guide

3(4)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 E
343/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
The following commands are only relevant, if the
music source is connected to a BTU-A board:
1201
Line signal scheme
Enter value STANDARD (=1)
1302
Outgoing digit transmission
This command indicates how the digits are sent out
from the interworking exchange. The initial value
depends on the type of the BTU-A.
Enter value NO TRANSMISSION (=3)
1307
PTS-signal from PE ?
This command is used to state whether the exchange
is to wait for a proceed-to-send signal (PTS-signal)
from the parent exchange.
Enter value = NO
The following commands are only relevant, if the
VMU-HD/MFU is used as music source:
The following command is only accessable from
System Telephones:
4427
Recording music announcements
The command is used to record the music
announcements for the music-on-hold function
EXECUTIVE Telephone
x enter the desired voice prompt number
Valid data: 0-15
Press ENTER to accept and to go to the desired voice
prompt.
Modify the specified voice prompt by pressing one of
the function keys.
F1 To record the voice prompt
F2 To listen to the stored voice prompt
F3 To erase the stored voice prompt
F4 To return to the previous level.
The following commands are general VMU-HD/
MFU commands valid for all voice features and
should therefor also be consired for the music-on-
hold functionality:
4303
Length of voice announcements
This command is used to determine the maximum
length of a recorded voice announcements.
zzz Enter required time
Valid data: 0 - 255 seconds,
Default data: 59
10 Jul 14:40 +15˚
MOH PROMPTS 0-15 4427 x
backward forward c/i return
10 Jul 14:40 +15˚
MUSIC ON HOLD VOICE PROMPT NUMBER: x
record play-back erase return
10 Jul 14:40 +15˚
MAX TIME SPCH ANNO 4303 zzz