User`s guide

11(14)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 F
361/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
1411
Time supervision first digit
The command is used to state the supervision time for
incoming calls between seizure and first digit. The
parameter shall only be used for direct in-dialing lines
and automatic incoming tie lines.
Valid data : 0 - 255 seconds.
0 means that no time supervision
takes place.
1412
Time supervision between digits
The command is used to state the supervision time for
incoming calls between digits. The parameter shall
only be used for lines of type direct indialling and
automatic incoming tie lines.
Valid data: 0 - 255 seconds.
If the parameter is set to zero there will be No time
supervision.
1413
Time supervision of answer
The command is used to state the supervision time for
incoming calls between End Of Selection and answer
before rerouting to an alternative answering position.
The parameter shall only be used for lines of type
direct in-dialing and automatic incoming tie lines.
Valid data: 0 - 255 seconds.
If the parameter is set to zero there will be no re-
routing.
1802
Predigits for incoming number
The command is used to state the digits that shall be
inserted before the incoming number before it is
analyzed.
Valid data: 1-2 digits
1803
Irrelevant digits
The command is used to state how many initial digits
in the incoming number shall be omitted before the
number is analyzed.
Valid data: 0-3
Name String
6601
Administrative data for extensions and trunks
This command defines a name string for extensions
and trunks.
xxxx Enter extension's or trunk's directory
number
Press Enter two times
nn..n Enter the name of the extension or trunk,
a maximum of 35 characters
10 Jul 14:40 +15˚
ADM. DATA EXT/TRUNK 6601 xxxx
backward forward return
10 Jul 14:40 +15˚
nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn
return