User`s guide

12(14)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 F
361/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
6501
Programming of data records
This command defines a name string for a directory
number, e.g. for a route.
Press Enter.
The display shows:
xxxx Enter the relevant directory number
Press Enter.
The display shows:
Enter the relevant text, maximum 35
characters.
Trunk answering position
The command group 11 determines the destination of
incoming and rerouted calls.
Incoming calls are routed to the specified answering
position. Specify the answering position by its direc-
tory number. The command "4001 alternative an-
swering position for general operator“ is Not active
when the directory number for an individual answering
position is defined.
1101 - 1104
Programming of answering positions
On system start all trunks are directed to directory
number 200.
Four different answering positions can be programmed
for each trunk:
• 1101 Answering position, day
• 1102 Answering position, night
• 1103 Alternative answering position, day
• 1104 Alternative answering position, night
A call is directed to an alternative answering position
when the normal answering position does not answer
within a predetermined time
xxxx Enter the directory number of relevant
trunk
zzzz Enter the directory number of the
relevant answering position.
Default data = 200
Step to commands 1102 - 1104 and repeat above
procedure.
NOTE: Make sure that the trunk is presented on a
function key, if you want to delete directory
numbers for above commands.
10 Jul 14:40 +15˚
ADM. DATA GENERAL 6501 >
backward forward return
10 Jul 14:40 +15˚
ENTER DIR. No xxxx
pf_3 return
10 Jul 14:40 +15˚
_ xxxx
backward forward pf_3 return
10 Jul 14:40 +15˚
ANSWERING POS DAY 1101 xxxx zzzz
backward forward c/i return