User`s guide

18(59)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 A
365/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Supplementary service -
Calling/Connected Line/Name Identity
Definition
This feature is available as supplementary and
proprietary service for private network calls.
It includes:
• CLIP (Calling Line Identity Presentation)
• CLIR (Calling / Connected Line Identity Restr.)
• COLP (COnnected Line identity Presentation)
• CNIP (Calling Name Identity Presentation)
• CNIR (Calling / Connected Name Identity Restr.)
• CONP (COnnected Name Identity Presentation)
The maximum length of numbers in the private
numbering plan is 8 digits and for numbers in the
public numbering plan 20 digits.
Operation
CLIP / CNIP
Calling Line / Name Identity Presentation enables the
called party to identify the calling party.
Standard Telephone
If the display is too small to display both, the full
number and the full name, the number always takes
priority over the name. Therefore the name will be
truncated. The maximum number of characters for a
Name is 20.
Executive Telephone
Operator’s Console
CLIR / CNIR
Calling Line / Name Identity Restriction enables the
calling party to prevent the presentation of its number/
name to the called party.
System telephones
There are two alternatives for outgoing calls to restrict
the caller’s number/name at the called party (number/
name secrecy).
Permanent mode:
The extension is configured to always restrict
presentation of the caller’s number/name. At call
setup, CLIR / CNIR is included.
Temporary mode:
A „number/name secrecy“ key can be programmed at
system telephones, and the user himself/herself may
decide whether or not to restrict the caller‘s number/
name at the called party.
This key is at the same time used for the COLR/CONR
function described in the following chapter. For caller’s
number/name restriction at the called party, the key
„number/name secrecy“ has to be activated before call
setup. Restriction is activated until the key is pressed
again.
10 Feb 14:40 +15˚
WHITE D 8502123 C
10 Feb 14:40 +15˚
WHITE DAVID 8502123 CALLING
directory redial prog
10 Feb 14:40 +15˚
8502123 NEWCALL
WHITE DAVID NEW
C= 0 I= 0
directory redial