User`s guide

2(4)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 E
101/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
ANALOGUE Telephones
• Lift handset
• Await dial tone
• Dial relevant abbreviated number.
Stored number is transmitted
Capacity
Up to 16 number series can be defined for common
abbreviated numbers.
The number of abbreviated numbers is restricted
solely by the available E2PROM capacity, but it is
possible to program at least 1000 numbers.
Each abbreviated number can have a maximum of 23
digits including intermediate tones and trunk access
number (Up to ASB 150 02 R9 each abbreviated
number can have 17 digits).
Limitations
Callers must have an abbreviated number dialling
category that permits access to the relevant
abbreviated number.
Common abbreviated numbers are checked by the
traffic group matrix and are not subject to analysis by
the TCD (Trunk Call Discrimination)-function.
Abbreviated numbers can be stored on name selection
keys.
Programming
Abbreviated number series
These commands are only accessable via RASC:
5413
Create directory number series for abbreviated
numbers
All short numbers require a creation procedure, which
means entering the first few digits of the series to be
created. The number series is marked with a
hyphen (-).
Examples:
• 602 = 602
• 61- = 610 - 619
• 62-- = 6200 - 6299
• 5--- = 5000 - 5999
5513
Delete directoryt number series for abbreviated
numbers
This command erases an existing number series.
5620
Alteration of directory number series for abbrevia-
ted numbers
This command changes an existing short number
series.
5813
Show abbreviated number series for abbreviated
numbers
This command is used to read which abbreviated
number series have been programmed.
See also "DIRECTORY NUMBERS",
document 163/155 34-ASB 150 02 Uen.